Patterns

Reports received from our customers have universally praised the patterns produced by both GaugeMate Gold and GaugeMate Silver adapters. We decided to pattern some of the combinations tested by Sherman Bell. The paper used is 4’ square with a 30” circle and an orange dot in the center. All patterns were fired from a benchrest at 30-yards. The front bead was placed at 6 o’clock to the orange dot with just a very small portion of the rib showing. By taking this overall approach, we hoped to demonstrate not just how well the loads pattern but also that there is no shift in point-of-impact.

Patterning Test Results

1/7